the site with the most backlinks wins…

You are currently browsing the flipangle weblog archives for December, 2009.



My Other Projects


Archive for December, 2009

Not exactly possible. SATA2 drives, though apparently back compatible to SATA1 (1.5Gb/s), don’t always automatically default back on this m/board.

Look up your HDD manufacturers site and find the jumper setting to revert it to SATA1. My drive has a drawing on the drive cover 🙂

Ensure Onboard SATA is *enabled* in the BIOS.

The MB will then recognise the SATA drive. I just could not make this drive bootable.  So currently booting from the IDE drive.